Products

Tajima Embroidery Machine Pulley S5M 20 Teeth 501480010000 for Tajima,SWF,China Embroidery Machine Parts D05-S5M-D19-T20-W40-KF.

Tajima Embroidery Machine Pulley.

S5M tooth type; 19mm hole diameter; 20 teeth number; 40mm belt width; KF shape. About the pulleys for embroidery machines, some necessary data shall be given to determine the pulley. 1. Tooth type: Usually embroidery machines adopts 5M, S5M, 8M, S8M tooth type. Most of the Tajima embroidery machines adopts S5M tooth type. AT5, T5, T10 also exist. 2. Teeth number of the pulley. This is very important. Please confirm how many teeth the pulley has. 3. Hole diameter. Measure the hole diameter of the pulley by a caliper. Usually there are bearings were insert into the pully, if you have the bearing model, then you can check the outer diameter of the bearing. The outer diameter of the bearing is the diameter of the pulley hole. 4. Width of the belt. Usually the width of the pulley for belt is a little bigger than the belt applied, for example if the belt is 35mm, the pulley space for belt would be 36mm or 37mm. After you have these four datas, you can determine the pulley according to the shape like AF, BF, KF, etc. If you can't find the pulley you need in the store, please send these datas to us, we are glade to help.

we have many kinds of embroidery machine parts.

we only update a part of machine parts, please contact with us if you can't find the parts you want from our store. send the part pictures ,and we will update a new link of the parts you need.

Regardless of is the quality or services , we can give you a good answer.

more  China Embroidery Machine parts

more  swf Embroidery Machine parts

more  tajima Embroidery Machine parts

There are two methods make contact easier.